dim600dds12 - a000 dual switch igbt module replaces ds5868 - 2 ds5868 - 3 july 2014 (ln31 761 ) caution: this device is sensitive to electrostatic discharge. users should follow esd handling procedures 1 / 8 www.dynexsemi.com features ? 10s short circuit withstand ? non punch through silicon ? isolated cu base with al 2 o 3 substrates ? lead free construction applications ? high reliability inverters ? motor controllers the powerline range of high power modules includes half bridge, cho pper, dual, single and bi - directional switch configu rations covering voltages from 6 00v to 33 00v and currents up to 2400a. the dim 6 00dds 12 - a 000 is a dual switch 12 00v, n - channel enhancement mode, insulated gate bipolar transistor (igbt) module. the igbt h as a wide reverse bias safe operating area (rbsoa) plus 10s short circuit withstand. this device is optimised for traction drives and other applications requiring high thermal cycling capability. the module incorporates an electrically isolated base plat e and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety . ordering information order as: dim 6 00dds 12 - a000 note: when ordering, please use the complete part number key paramet ers v ces 12 00v v ce(sat) * (typ) 2. 2 v i c (max) 6 0 0a i c(pk) (max) 12 00a * measured at the power busbars, not the auxiliary terminals fig. 1 circuit configuration outline type code: d (see fig. 11 for further information) fig. 2 package 4 x m8 sc re w ing depth m ax 16 sc re w ing depth m ax 8 6 x m4 6 x o 7 7 ( c ) 1(e) 3( c ) 5 ( e ) 5 ( e ) 6 ( g ) 10 ( e ) 2( c ) 4(e) 12 ( c ) 11 ( g ) 130 0. 5 114 0.1 57 0.2 5 57 0.2 5 124 0. 25 140 0. 5 30 0.2 16 0.2 18 0.2 44 0.2 57 0.2 53 0.2 40 0.2 5 0. 2 29.2 0.5 5.25 0. 3 35 0.2 11.5 0.2 14 0.2 55.2 0. 3 11.85 0.2 38 +1.5 -0.0 28 0.5 20 0.1
dim600dds12 - a000 2 /8 caution: this device is sensitive to electrostatic discharge. users should follow esd handling procedures. www.d ynexsemi.com absolute maximum ratings stresses above those listed under absolute maximum ratings may cause permanent damage to the device. in extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. appropriate safety precautions should always be followed. exposure to absolute maximum ratings may affect device reliability. t case = 25c unless stated otherwise symbol parameter test conditions max. units v ces collector - emitter voltage v ge = 0v 12 00 v v ges gat e - emitter voltage 20 v i c continuous collector current t case = 8 5 c 6 00 a i c(pk) peak collector current 1ms, t case = 115 c 12 00 a p max max. transistor power dissipation t case = 25 c , t j = 150 c 5208 w i 2 t diode i 2 t value v r = 0, t p = 10ms, t j = 125oc 100 ka 2 s v isol isolation voltage C per module commoned terminals to base plate. ac rms, 1 min, 50hz 2500 v thermal and mechanical ratings internal insulation material: al 2 o 3 baseplate material: cu creepage distance: 20 mm clearance: 10 mm cti ( comparative tracking index): >600 symbol parameter test conditions min typ. max units r th(j - c) thermal resistance C th(j - c) thermal resistance C th(c - h) thermal resistance C j junction temperature transistor - - 150 c diode - - 125 c t stg storage tempe rature range - - 40 - 125 c screw torque mounting C C C
dim600dds12 - a000 caution: this device is sensitive to electrostatic discharge. users should follow esd handling procedures 3 / 8 www.dynexsemi.com electrical characteristics t case = 25 c unless stated otherwise. symbol parameter test conditions min ty p max units i ces collector cut - off current v ge = 0v, v ce = v ces 1 ma v ge = 0v, v ce = v ces , t case = 125 c 18 ma i ges gate leakage current v ge = 20v, v ce = 0v 3 a v ge(th) gate threshold voltage i c = 2 0ma, v ge = v ce 4.5 5.5 6.5 v v ce(sat) collector - e mitter saturation voltage v ge = 15v, i c = 4 00a 2. 2 2.8 v v ge = 15v, i c = 4 00a, t j = 125 c 2.6 3.2 v i f diode forward current dc 600 a i fm diode max imum forward current t p = 1ms 1200 a v f diode forward voltage i f = 4 00a 2. 1 2. 4 v i f = 4 00a, t j = 125 c 2. 1 2. 4 v c ies input capacitance v ce = 25v, v ge = 0v, f = 1mhz 70 nf q g gate charge 15v 6 c c res reverse transfer capacitance v ce = 25v , v ge = 0v, f = 1mhz nf l m module inductance C per switch 20 nh r int internal transistor resistance C per switch 270 ? sc data short circuit current, i sc t j = 125c, v cc = 900v t p 10s, v ge 15v v ce (max) = v ces C l * x di/dt iec 60747 - 9 34 00 a note: * l is the circuit inductance + l m
dim600dds12 - a000 4 /8 caution : this device is sensitive to electrostatic discharge. users should follow esd handling procedures. www.dynexsemi.com electrical characteristics t case = 25c unless stated otherwise symbol parameter test conditions min typ. max units t d(off) turn - off delay time i c = 6 00a v ge = 15v v ce = 6 00v r g(on) = 2.7 ? r g(off) = 2.7 ? l s ~ 1 2 0 nh 920 n s t f fall time 140 ns e off turn - off energy loss 100 mj t d(on) turn - on delay time 390 ns t r rise time 180 ns e on turn - on energy loss 55 mj q rr diode reverse recovery charge i f = 6 00a v ce = 6 00v di f /dt = 36 00a/s 100 c i rr diode reverse recovery current 370 a e rec diode reverse recovery energy 50 mj t case = 125c unless stated otherwise symbol parameter test conditions min typ. max units t d(off) turn - off delay time i c = 600a v ge = 15v v ce = 600v r g(on) = 2.7 ? r g(off) = 2.7 ? l s ~ 12 0 nh 1000 n s t f fall time 160 ns e off turn - off energy loss 125 mj t d(on) turn - on delay time 460 ns t r rise time 180 ns e on turn - on energy loss 65 mj q rr diode reverse recovery charge i f = 6 00a v ce = 6 00v di f /dt = 3 6 00a/s 200 c i rr diode reverse recovery current 480 a e rec diode reverse recovery energy 100 mj
dim600dds12 - a000 caution: this device is sensitive to electrostatic discharge. users should follow esd handling procedures 5 / 8 www.dynexsemi.com fig. 3 typical output characteristics fig. 4 typical output characteristics fig. 5 typical switching energy vs collect or current fig. 6 typical switching energy vs gate resistance
dim600dds12 - a000 6 /8 caution : this device is sensitive to electrostatic discharge. users should follow esd handling procedures. www.dynexsemi.com fig. 7 diode typical forward characteristics fig. 8 reverse bias safe operating area fig. 9 diode reverse bias safe operating area fig. 10 transient thermal impedance
dim600dds12 - a000 caution: this device is sensitive to electrostatic discharge. users should follow esd handling procedures 7 / 8 www.dynexsemi.com package details for further package information, please visit our website or contact customer services. all dimensions in mm, unless stated otherwise. do not scale. nominal weight: 1450 g module outline type code: d fig. 11 module outline drawing 4 x m8 screwing depth max 16 screwing depth max 8 6 x m4 130 0.5 124 0.25 30 0.2 16 0.2 18 0.2 29.2 0.5 5.25 0.3 14 0.2 5 0.2 57 0.25 57 0.25 114 0.1 40 0.2 44 0.2 53 0.2 57 0.2 11.85 0.2 55.2 0.3 38 +1.5 -0.0 35 0.2 11.5 0.2 7 (c) 1(e) 3(c) 5 (e) 5 (e) 6 (g) 10 (e) 2(c) 4(e) 12 (c) 11 (g) 140 0.5 6 x ? 7
dim600dds12 - a000 8 /8 caution : this device is sensitive to electrostatic discharge. users should follow esd handling procedures. www.dynexsemi.com important information: this publication is provided for information only and not for resale. the products and information in this publication are intended for use by appropriately trained technical personnel. due to the diversity of product applications, the information contained herein is provided as a general guide only and does not constitute any guarantee of suitability for use in a specific application . the user must evaluate the suitability of the product and the completeness of the product data for the application. the user is responsible for product selection and ensuring all safety and any warning requirements are met. should additional product information be needed please contact customer service. although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical errors. the information is provided without any warranty or guarantee of any kind. this publication is an uncontrolled document and is subject to change without notice. when referring to it please ensure that it is the most up to date version and has not been superseded. the products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to proper ty. the user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or malfunction. the products must not be touched when operating because there is a danger of electrocution or severe burnin g. always use protective safety equipment such as appropriate shields for the product and wear safety glasses. even when disconnected any electric charge remaining in the product must be discharged and allowed to cool before safe handling using protective gloves. extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. use outside the product ratings is likely to cause permanent damage to the product. in extreme conditions, as with all semicon ductors, this may include potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. appropriate application design and safety precautions should always be followed to protect persons and property. produ ct status & product ordering: we annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully appr oved for production. the annotations are as follows: - target information: this is the most tentati ve form of information and represents a very preliminary specification. no actual design work on the product has been started. preliminary information: the product design is complete and final characterisation for vo lume production is in progress. the datasheet represents the product as it is now understood but details may change. no annotation: the product has been approved for production and unless otherwise notified by dynex any product ordered will be supplied to the current version of the data sheet prevailing at the time of our order acknowledgement. all products and materials are sold and services provided subject to dynexs conditions of sale, which are available on request. any brand names and product names u sed in this publication are trademarks, registered trademarks or trade names of their respective owners. headquarters operations customer service dynex semiconductor ltd doddington road, lincoln, lincolnshire, ln6 3lf, united kingdom dynex semiconduct or ltd doddington road, lincoln, lincolnshire, ln6 3lf, united kingdom fax: +44(0)1522 500550 fax: +44(0)1522 500020 tel: +44(0)1522 500500 tel: +44(0)1522 502753 / 502901 web: http://www.dynexsemi.com email: power_solutions@dynexsemi.com ? dyne x semic onductor ltd. 2005 . technical documentation C not for resale.
|
